RJ45 Connectors & Accessories

360° shielded Cat.6A RJ45 male connector for field assembly and with full metal housing. Suitable for stranded wires (AWG27/7 - 22/7) and solid wire (AWG 24/1 - 22/1) and for cables with diameters from 5 to 9 mm. Colour code according to T568A. Assembly possible without product dependent special tools (parallel press tool HX-CAT6A recommended). Adequate for 10 Gigabit Ethernet and Power over Ethernet+ (IEEE 802.3at). Length: 52.2 mm; Width: 13.8 mm.

Right-angled, 360° shielded Cat.6A RJ45 male connector for field assembly and with full metal housing. Suitable for stranded wires (AWG27/7 - 22/7) and solid wire (AWG 24/1 - 22/1) and a cable diameter of 5.5 to 10 mm. Colour code according to T568A. Assembly possible without product dependent special tools (parallel press tool HX-CAT6A recommended). Adequate for 10 Gigabit Ethernet and Power over Ethernet+ (IEEE 802.3at). Length: 45.7 mm; Width: 13.9 mm; Height: 38 mm.

360° shielded Cat.6A RJ45 male connector for field assembly and with full metal housing. Suitable for stranded wires (AWG27/7 - 22/7) and solid wire (AWG 24/1 - 22/1) and for cables with diameters from 5 to 10 mm. Colour code according to T568A. Assembly possible without product dependent special tools (parallel press tool HX-CAT6A recommended). Adequate for 10 Gigabit Ethernet and Power over Ethernet+ (IEEE 802.3at). Length: 56.6 mm; Width: 13.9 mm.

Wire manager MFP8 (spare part) for pin assignment T568A according to TIA/EIA 568-C.2.

This RJ45 connector set for field assembly consists of a black synthetical housing (IP67) and a RJ45 plug according to Cat.6 Class EA (subscript). The set is suitable for stranded wires (AWG26/7 - 22/7) and solid wires (AWG 26/1 - 22/1) and for cables with diameters from 5 to 10 mm. Assembly possible without product dependent special tools. Adequate for 10 Gigabit Ethernet and Power over Ethernet (IEEE 802.3af). Housing dimensions: Length: 77.5 mm; Outer diameter: 30 mm. Appropriate protection cap: NE8C6-STXV1-CAP.

Black protection cap for RJ45 connector set NE8C6-STXV1-RJ45, according to protection class IP67 in combination with plug housing.

Connector insert STX RJ45 Cat.6 Class EA (subscript) for field assembly, for stranded and solid wire with AWG22-26, complies with PoE according to IEEE 802.3af. Suitable as spare part for the RJ45 connector kit NE8C6-STXV1-RJ45.

The STX V1 flange kit with plastic housing and RJ45 coupler is according to IP67. It is suitable for Cat.6 Class EA (subscript) (Channel) and PoE+ according to IEEE 802.3at.

STX V1 flange protection cap made of plastic according to IP67 in conjunction with flange housing or connector protection cap.

STX RJ45 coupler Cat.6 Class EA (A subscript), with a zinc diecast housing. Complies with PoE+ according to IEEE 802.3at and 10 Gigabit Ethernet according to IEEE 802.3an. Suitable as spare part for the RJ45 connector kit NE8C6-STXV1-FF.

RJ45 connector with housing for field assembly.

HX-CAT6A

Parallel press tool for etherCON CAT6A series