In-Wall Plates

Mounting Plate-Set EDIZIOdue, plastic white or black, including: connector plate, assembled with 1 x HDMI Gender Changer f/f

UP-EDIZIOdue white or black with a short HDMI cable of almost 10 cm, female / female.

UP-ED/2HDMI-KBS

White in-wall mounting set EDIZIOdue, equipped with 2x HDMI breakout cables (1.4) female/female of approx. 10 cm length and one cover frame made of plastic.

Mounting plate EDIZIOdue assembled with HDMI sockets. The back side has screwing terminals and the cover
is made of white or black plastic.

Mounting Plate-Set EDIZIOdue, plastic, including: connector plate, assembled with 1 x DVI Gender Changer f/f

White in-wall mounting set EDIZIOdue, equipped with one DVI-I feed-through female/female, one silver-plated 3.5 mm stereo mini jack, solder terminals and one cover frame made of plastic.

White in-wall mounting set EDIZIOdue, equipped with one DVI-I feed-through female/female, 2x gold-plated phono jacks (black/red), solder terminals and one cover frame made of plastic.

Mounting Plate-Set EDIZIOdue, plastic, including: connector plate, assembled with 1 x VGA Gender Changer f/f (15pole, D-Sub HD)

UP-ED/VGA-SKA

White in-wall mounting set EDIZIOdue, equipped with one VGA connector, screw terminal on the rear side and one cover frame made of plastic.

Black in-wall mounting set EDIZIOdue, equipped with one VGA connector, screw terminal on the rear side and one cover frame made of plastic.

Mounting Plate-Set EDIZIOdue, plastic, including: connector plate, assembled with 1 x VGA Gender Changer f/f (15pole, D-Sub HD) and 1 x 3.5 mm Jack

up-ed_35_vga-ska

White in-wall mounting set EDIZIOdue, with VGA 15-pole D-sub "HD" female with screw terminal and 3.5 mm stereo mini jack with solder contact.

Mounting Plate-Set EDIZIOdue, plastic, including: connector plate, assembled with 1 x VGA Gender Changer f/f (15pole, D-Sub HD) and 2 x Cinch (black/red) solder contacts, gold-plated

White in-wall mounting set EDIZIOdue, equipped with one HDMI feed-through (1.4) female/female, one VGA 15-pole "HD" feed-through female/female and one cover frame made of plastic.

EDIZIOdue assembled with 1 Phono yellow and 1x VGA gender changer f/f

White in-wall mounting set EDIZIOdue, equipped with 2x gold-plated phono jacks (black/red) as feed-throughs female/female and one cover frame made of plastic.

White in-wall mounting set EDIZIOdue, equipped with one Y/C female chassis connector (S-Video) with screw terminal, 2x gold-plated phono jacks (black/red) with solder terminals and one cover frame made of plastic.

White in-wall mounting set EDIZIOdue, equipped with 3x gold-plated phono jacks (black/red/yellow), solder terminals and one cover frame made of plastic.

White in-wall mounting set EDIZIOdue, equipped with 3x gold-plated phono jacks (black/red/yellow) as feed-throughs female/female and one cover frame made of plastic.

Black in-wall mounting set EDIZIOdue, equipped with 3x gold-plated phono jacks (black/red/yellow), solder terminals and one cover frame made of plastic.

White USB charger socket with 2x USB connectors type A, 2.0 according to IEC 62684. The USB receptacles are for power supply only. No data transmission is taking place.

Mounting Plate-Set EDIZIOdue, plastic, including: connector plate, assembled with 1 x BNC Gender Changer
f/f and 2 x Cinch (black/red) solder contacts, gold-plated

UP-EDIZIOdue assembled with HDMI cable f/f, 3.5 mm mini jack cable f/f and 1x VGA 15-pole „HD“ feed through f/f.

White in-wall mounting plate EDIZIOdue, equipped with IDC terminals for 2x loudspeaker cables and one cover frame made of plastic.

White in-wall mounting plate EDIZIOdue, equipped with screw terminals for 2x loudspeakers and one cover frame made of plastic.

White in-wall mounting set EDIZIOdue, equipped with one D-sub9 feed-through female/female and one cover frame made of plastic. Therefore this mounting set is suitable for connection of RS-232 / RS-485 cables.

Mounting Plate-Set BASICO, connector plate, with one mounting hole for D-Serie connector types, with mounting screws

Mounting Plate-Set BASICO, plastic, connector plate, with two mounting hole for D-Serie connector types, with mounting screws

White in-wall mounting plate STANDARDdue made of high-quality thermosetting material, with one D-series cut-out and one cover frame with a diameter of 58 mm. The inner mounting frame is made of steel. Outer dimensions: 90 x 90 mm.

Black in-wall mounting plate STANDARDdue made of high-quality thermosetting material, with one D-series cut-out and one cover frame with a diameter of 58 mm. The inner mounting frame is made of steel. Outer dimensions: 90 x 90 mm.

Mounting Plate-Set EDIZIOdue, plastic, including: connector plate, with one mounting hole for D-Serie
connector types

Mounting Plate-Set EDIZIOdue, plastic, including: connector plate, with two mounting holes for D-Serie
connector types, with mounting screws

White in-wall mounting set with one cut-out for one D-series chassis connector, one mounting plate with M3 thread, including INOX A4 mounting screws and one cover frame with flap made of plastic. In closed condition protected against water jets according to IP65. Comes without connector.

White in-wall mounting set with 2x cut-outs for D-series chassis connectors, one mounting plate with M3 thread, including INOX A4 mounting screws and one cover frame with flap made of plastic. In unmated condition protected against water jets according to IP55. Comes without connector.

White in-wall mounting set EDIZIOdue with a cut-out for one powerCON® TRUE1 chassis connector, with one mounting plate with M3 thread and one cover frame made of plastic. Comes without connector.

Mounting Plate-Set EDIZIOdue, plastic, including: dummy plate

Mounting ring for in-wall plates as accessory or replacement material.

Downloads